600 Concrete Pipe machine -- tuburi, conducte --

UTC 600 - CONCRETE PIPE MACHINE
UTC 600 - UTILAJ PENTRU TUBURI DIN BETON

The production capacity of the machine is limited to 600 mm from 150 mm. The length of the produced pipe is changed to 1500 mm from 100 mm.

This machine is able to produce reinforced concrete pipes.

The manufacturing productivity is enhanced because of the rapid mould changing system and easy using.

The cell vibration system that is used in the machine is developed to get smooth finished product surface, high summit pressure and designed to prevent hydraulic leaking in the system.

The type of jointed from the inner pipes can be easily produced by using UTC 600.

Two workers are enough to work with the machine.

The hydraulic system is commanded servo valves and joysticks.

TECHNICAL PROPERTIES
Vibration Motor Cell type.
Lubrication Hydraulic Oil.
Vibration Motor 2800 rpm = 5,5 kw
1. Hydraulic Motor 1400 rpm= 15 kw
2. Hydraulic Motor 1400 rpm= 3 kw
Continue Motor 900 rpm= 0,75 kw
Eccentric Motor 100 rpm= 1,5 kw
Conveyor 50 rpm= 1,5 kw
Conveyor 50 rpm= 1,5 kw

HYDRAULIC SYSEM PROPERTIES
1. Pump 20 lt/m
Lubrication Hydraulic Oil.
Vibration Motor 2800 rpm = 5,5 kw
2. Pump 40 lt/m
Working Pressure 120 Bar
Tank Volume 250 lt
Transmission Tank 30 lt
Bunker Volume 1m3
Bunker Volume 1m3

Capacitatea de productie a masinii este limitata de la 150 la 600 mm.
Lungimea conductei produse se schimba de la 100 la 1500 mm.

Utilajul pentru tuburi de canalizare 600 este capabila sa produca tevi de beton armat.

Productia este inbunatatita datorita sistemului de schimbare rapida a matritei si a folosirii cu usurinta.

Sistemul celular de vibratii si sistemul hidraulic de presare sunt concepute sa dea o suprafata neteda produsului final.

Tipul imbinarii din interiorul tuburilor poate fi produs usor folosind UTC 600.

Doi muncitori sunt de ajuns pentru a lucra cu acest tip de masina.

Sistemul hidraulic este comandat prin maneta sau servo-valve.

PROPRIETATI TEHNICE
Motor celular cu vibratii cu u leihidraulic.
Motor cu vibratii 2800 rpm = 5,5 kw
1. Motor hidraulic 1400 rpm= 15 kw
2. Motor hidraulic 1400 rpm= 3 kw
Motor 900 rpm= 0,75 kw
Motor reductor 100 rpm= 1,5 kw
Banda transportoare 50 rpm=1,5 kw
Banda transportoare 50 rpm=1,5 kw

SISTEMUL HIDRAULIC
1. Pompa 20 lt/m cu ulei hidraulic
Motor cu vibratii 2800 rpm = 5,5 kw
2. Pompa 40 lt/m
Presiune de lucru 120 Bar
Rezervorul 250 lt
Rezervorul de transmisie 30 lt
Volum bunker 1m3
Volum bunker 1m3